So here we are in July again this year! How did it arrive so fast and so hot?? We know in these hot summer months, we tend to use more water outdoors, which is why July is designated as Smart Irrigation Month by the Irrigation Association and endorsed by Governor Abbott.
I don’t think anyone deliberately chooses to look silly or be wasteful by watering during or immediately after a huge rainstorm, or during the heat of the day. For commercial properties, it’s bad for their image to look so wasteful, so I would think they’d be the first to jump on the efficient bandwagon. Unfortunately, that’s not always the case. This brings me to my topic for Smart Irrigation Month—Upgrading your Irrigation System.
Updating, or improving irrigation systems, in my experience, tend to happen mainly when other big yard activities are going on—installing a pool or a new patio or deck; replanting the sod or a huge remodel of all the landscaping in the yard. I don’t really see folks upgrading their systems, just because there’s a new model of controller or sensor. While irrigation is technology, apparently it’s not the cool technology that people invest in as frequently as their electronic devices.
I think it’s because we don’t often visually see them or think of them nearly as much as our phones, or portable devices. They seem to do a good job—the grass is alive, so what’s to change? Well, technology has come a long way in the last decade in irrigation systems, which can save you money in water costs, conserve water, water more to the plant’s needs, and maybe have a little cool factor when you talk about your yard with your friends! Maybe!
The two main areas your controller can be smart is when dealing with the weather. Sensors and controllers are the two areas that can help you with determining if the yard even needs to be watered.
- Sensors are still around—rain sensors, freeze sensors, and soil moisture sensors are the main ones.
- A rain sensor turns off the irrigation system (if it’s running) after a specified amount of water has fallen or it delays the system from turning on after a specified amount of rain—so all of its actions are during or after the rain. There’s no weather forecasting, or determination of if watering is necessary. They have to be installed in an unobstructed location (like a fence or roofline) so that rain can fall in it. I’ve seen them under trees and under buildings! But, it is better to have a rain sensor than nothing! By the way, they’re pretty cheap—about $35-$75 retail.
- Tremendous improvements have been made in the soil moisture sensor arena. A soil moisture sensor is actually buried in the ground about 6-inches deep (yes, you have to have that much soil for these to work!). They take moisture readings from the soil to determine if the soil is dry enough to require the irrigation to run; if it determines the soil is wet enough, it doesn’t allow the system to run. Ideally, you’d want more than one soil moisture sensor installed in your yard, one in sunny area and one in a shadier area, otherwise parts of your yard may be under- or over-watered. It’s more accurate watering than just watering because it’s a Saturday. It’s watering because the soil actually is dry. They are a little more costly than rain sensors, but more effective use of water.
- Freeze sensors do not allow an irrigation system to turn on when temperatures reach a specific degree, usually around 40° These aren’t that common to have at homes, because we just turn off our irrigation systems for the winter. Commercial properties tend to water more year-round and would benefit from a freeze sensor to prevent the irrigation from freezing and causing a hazard.
- Weather-Based Controllers–this is where things have really gotten interesting.
- There are several controllers on the market currently that take into account the actual weather, either with a weather-station that is installed at your home (it’s not too large), or a near-by weather-station that the controller can connect to thru WiFi. That said, you would need to have a WiFi connection at your property that the controller can connect to.
- The controller checks the weather forecasts daily, if not multiple times a day, to determine if the irrigation system needs to run or not. It may delay the irrigation cycle if rain or other inclement weather is forecast.
- These controllers need some extra set up time. Once they are installed, they are not just go to go. You have to spend a little time to enter in information about each irrigation station in your yard, like what type of sprinkler head it is, how much light it receives, landscape material, slope, and even more. There is the very real possibility that using one of these controller can increase your water use, if it’s not set up properly.
- Many of these “smart” controllers have online apps or websites to use. The irrigation can now be controller from your desktop, laptop, tablet or phone! It’s a little nicer than standing in your hot garage to make adjustments, which is pretty cool!
- Look for a controller that is WaterSense approved. That’s what is approved by the City’s rebate, as it’s been third-party tested to maintain water savings.
The City’s Efficient Irrigation Rebate provides a rebate of 75% of the purchase cost of a sensor or weather-based controller for your existing irrigation system, so if you don’t currently have a working one, please get one and apply for the rebate!
Denial of responsibility! Vertical Lobby is an automatic aggregator around the global media. All the content are available free on Internet. We have just arranged it in one platform for educational purpose only. In each content, the hyperlink to the primary source is specified. All trademarks belong to their rightful owners, all materials to their authors. If you are the owner of the content and do not want us to publish your materials on our website, please contact us by email – firstname.lastname@example.org. The content will be deleted within 24 hours.